# helm upgrade --install postgres oci://registry-1.docker.io/bitnamicharts/postgresql -n postgres -f values.yaml --version 11.6.7 # Dump a DB from a pod to disk # kubectl -n postgres exec -it postgres-postgresql-0 -- bash -c 'PGPASSWORD= pg_dump -U ' > /path/to/db.pgdump ## @section Global parameters ## Please, note that this will override the parameters, including dependencies, configured to use the global value ## global: ## @param global.imageRegistry Global Docker image registry ## imageRegistry: "" ## @param global.imagePullSecrets Global Docker registry secret names as an array ## e.g. ## imagePullSecrets: ## - myRegistryKeySecretName ## imagePullSecrets: [] ## @param global.storageClass Global StorageClass for Persistent Volume(s) ## storageClass: "ceph-block" postgresql: ## @param global.postgresql.auth.postgresPassword Password for the "postgres" admin user (overrides `auth.postgresPassword`) ## @param global.postgresql.auth.username Name for a custom user to create (overrides `auth.username`) ## @param global.postgresql.auth.password Password for the custom user to create (overrides `auth.password`) ## @param global.postgresql.auth.database Name for a custom database to create (overrides `auth.database`) ## @param global.postgresql.auth.existingSecret Name of existing secret to use for PostgreSQL credentials (overrides `auth.existingSecret`). ## @param global.postgresql.auth.secretKeys.adminPasswordKey Name of key in existing secret to use for PostgreSQL credentials (overrides `auth.secretKeys.adminPasswordKey`). Only used when `global.postgresql.auth.existingSecret` is set. ## @param global.postgresql.auth.secretKeys.userPasswordKey Name of key in existing secret to use for PostgreSQL credentials (overrides `auth.secretKeys.userPasswordKey`). Only used when `global.postgresql.auth.existingSecret` is set. ## @param global.postgresql.auth.secretKeys.replicationPasswordKey Name of key in existing secret to use for PostgreSQL credentials (overrides `auth.secretKeys.replicationPasswordKey`). Only used when `global.postgresql.auth.existingSecret` is set. ## auth: postgresPassword: "" username: "" password: "" database: "" existingSecret: "" secretKeys: adminPasswordKey: "" userPasswordKey: "" replicationPasswordKey: "" ## @param global.postgresql.service.ports.postgresql PostgreSQL service port (overrides `service.ports.postgresql`) ## service: ports: postgresql: "" ## @section Common parameters ## ## @param kubeVersion Override Kubernetes version ## kubeVersion: "" ## @param nameOverride String to partially override common.names.fullname template (will maintain the release name) ## nameOverride: "" ## @param fullnameOverride String to fully override common.names.fullname template ## fullnameOverride: "" ## @param clusterDomain Kubernetes Cluster Domain ## clusterDomain: cluster.local ## @param extraDeploy Array of extra objects to deploy with the release (evaluated as a template) ## extraDeploy: [] ## @param commonLabels Add labels to all the deployed resources ## commonLabels: {} ## @param commonAnnotations Add annotations to all the deployed resources ## commonAnnotations: {} ## Enable diagnostic mode in the statefulset ## diagnosticMode: ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden) ## enabled: false ## @param diagnosticMode.command Command to override all containers in the statefulset ## command: - sleep ## @param diagnosticMode.args Args to override all containers in the statefulset ## args: - infinity ## @section PostgreSQL common parameters ## ## Bitnami PostgreSQL image version ## ref: https://hub.docker.com/r/bitnami/postgresql/tags/ ## @param image.registry PostgreSQL image registry ## @param image.repository PostgreSQL image repository ## @param image.tag PostgreSQL image tag (immutable tags are recommended) ## @param image.pullPolicy PostgreSQL image pull policy ## @param image.pullSecrets Specify image pull secrets ## @param image.debug Specify if debug values should be set ## image: registry: docker.io repository: bitnami/postgresql tag: 14.4.0-debian-11-r0 ## Specify a imagePullPolicy ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent' ## ref: https://kubernetes.io/docs/user-guide/images/#pre-pulling-images ## pullPolicy: IfNotPresent ## Optionally specify an array of imagePullSecrets. ## Secrets must be manually created in the namespace. ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/ ## Example: ## pullSecrets: ## - myRegistryKeySecretName ## pullSecrets: [] ## Set to true if you would like to see extra information on logs ## debug: false ## Authentication parameters ## ref: https://github.com/bitnami/bitnami-docker-postgresql/blob/master/README.md#setting-the-root-password-on-first-run ## ref: https://github.com/bitnami/bitnami-docker-postgresql/blob/master/README.md#creating-a-database-on-first-run ## ref: https://github.com/bitnami/bitnami-docker-postgresql/blob/master/README.md#creating-a-database-user-on-first-run ## auth: ## @param auth.enablePostgresUser Assign a password to the "postgres" admin user. Otherwise, remote access will be blocked for this user ## enablePostgresUser: true ## @param auth.postgresPassword Password for the "postgres" admin user. Ignored if `auth.existingSecret` with key `postgres-password` is provided ## postgresPassword: "" ## @param auth.username Name for a custom user to create ## username: "" ## @param auth.password Password for the custom user to create. Ignored if `auth.existingSecret` with key `password` is provided ## password: "" ## @param auth.database Name for a custom database to create ## database: "" ## @param auth.replicationUsername Name of the replication user ## replicationUsername: repl_user ## @param auth.replicationPassword Password for the replication user. Ignored if `auth.existingSecret` with key `replication-password` is provided ## replicationPassword: "" ## @param auth.existingSecret Name of existing secret to use for PostgreSQL credentials. `auth.postgresPassword`, `auth.password`, and `auth.replicationPassword` will be ignored and picked up from this secret. The secret might also contains the key `ldap-password` if LDAP is enabled. `ldap.bind_password` will be ignored and picked from this secret in this case. ## existingSecret: "" ## @param auth.secretKeys.adminPasswordKey Name of key in existing secret to use for PostgreSQL credentials. Only used when `auth.existingSecret` is set. ## @param auth.secretKeys.userPasswordKey Name of key in existing secret to use for PostgreSQL credentials. Only used when `auth.existingSecret` is set. ## @param auth.secretKeys.replicationPasswordKey Name of key in existing secret to use for PostgreSQL credentials. Only used when `auth.existingSecret` is set. ## secretKeys: adminPasswordKey: postgres-password userPasswordKey: password replicationPasswordKey: replication-password ## @param auth.usePasswordFiles Mount credentials as a files instead of using an environment variable ## usePasswordFiles: false ## @param architecture PostgreSQL architecture (`standalone` or `replication`) ## architecture: standalone ## Replication configuration ## Ignored if `architecture` is `standalone` ## replication: ## @param replication.synchronousCommit Set synchronous commit mode. Allowed values: `on`, `remote_apply`, `remote_write`, `local` and `off` ## @param replication.numSynchronousReplicas Number of replicas that will have synchronous replication. Note: Cannot be greater than `readReplicas.replicaCount`. ## ref: https://www.postgresql.org/docs/current/runtime-config-wal.html#GUC-SYNCHRONOUS-COMMIT ## synchronousCommit: "off" numSynchronousReplicas: 0 ## @param replication.applicationName Cluster application name. Useful for advanced replication settings ## applicationName: my_application ## @param containerPorts.postgresql PostgreSQL container port ## containerPorts: postgresql: 5432 ## Audit settings ## https://github.com/bitnami/bitnami-docker-postgresql#auditing ## @param audit.logHostname Log client hostnames ## @param audit.logConnections Add client log-in operations to the log file ## @param audit.logDisconnections Add client log-outs operations to the log file ## @param audit.pgAuditLog Add operations to log using the pgAudit extension ## @param audit.pgAuditLogCatalog Log catalog using pgAudit ## @param audit.clientMinMessages Message log level to share with the user ## @param audit.logLinePrefix Template for log line prefix (default if not set) ## @param audit.logTimezone Timezone for the log timestamps ## audit: logHostname: false logConnections: false logDisconnections: false pgAuditLog: "" pgAuditLogCatalog: "off" clientMinMessages: error logLinePrefix: "" logTimezone: "" ## LDAP configuration ## @param ldap.enabled Enable LDAP support ## DEPRECATED ldap.url It will removed in a future, please use 'ldap.uri' instead ## @param ldap.server IP address or name of the LDAP server. ## @param ldap.port Port number on the LDAP server to connect to ## @param ldap.prefix String to prepend to the user name when forming the DN to bind ## @param ldap.suffix String to append to the user name when forming the DN to bind ## DEPRECATED ldap.baseDN It will removed in a future, please use 'ldap.basedn' instead ## DEPRECATED ldap.bindDN It will removed in a future, please use 'ldap.binddn' instead ## DEPRECATED ldap.bind_password It will removed in a future, please use 'ldap.bindpw' instead ## @param ldap.basedn Root DN to begin the search for the user in ## @param ldap.binddn DN of user to bind to LDAP ## @param ldap.bindpw Password for the user to bind to LDAP ## DEPRECATED ldap.search_attr It will removed in a future, please use 'ldap.searchAttribute' instead ## DEPRECATED ldap.search_filter It will removed in a future, please use 'ldap.searchFilter' instead ## @param ldap.searchAttribute Attribute to match against the user name in the search ## @param ldap.searchFilter The search filter to use when doing search+bind authentication ## @param ldap.scheme Set to `ldaps` to use LDAPS ## DEPRECATED ldap.tls as string is deprecated,please use 'ldap.tls.enabled' instead ## @param ldap.tls.enabled Se to true to enable TLS encryption ## ldap: enabled: false server: "" port: "" prefix: "" suffix: "" basedn: "" binddn: "" bindpw: "" searchAttribute: "" searchFilter: "" scheme: "" tls: enabled: false ## @param ldap.uri LDAP URL beginning in the form `ldap[s]://host[:port]/basedn`. If provided, all the other LDAP parameters will be ignored. ## Ref: https://www.postgresql.org/docs/current/auth-ldap.html uri: "" ## @param postgresqlDataDir PostgreSQL data dir folder ## postgresqlDataDir: /bitnami/postgresql/data ## @param postgresqlSharedPreloadLibraries Shared preload libraries (comma-separated list) ## postgresqlSharedPreloadLibraries: "pgaudit" ## Start PostgreSQL pod(s) without limitations on shm memory. ## By default docker and containerd (and possibly other container runtimes) limit `/dev/shm` to `64M` ## ref: https://github.com/docker-library/postgres/issues/416 ## ref: https://github.com/containerd/containerd/issues/3654 ## shmVolume: ## @param shmVolume.enabled Enable emptyDir volume for /dev/shm for PostgreSQL pod(s) ## enabled: true ## @param shmVolume.sizeLimit Set this to enable a size limit on the shm tmpfs ## Note: the size of the tmpfs counts against container's memory limit ## e.g: ## sizeLimit: 1Gi ## sizeLimit: "" ## TLS configuration ## tls: ## @param tls.enabled Enable TLS traffic support ## enabled: false ## @param tls.autoGenerated Generate automatically self-signed TLS certificates ## autoGenerated: false ## @param tls.preferServerCiphers Whether to use the server's TLS cipher preferences rather than the client's ## preferServerCiphers: true ## @param tls.certificatesSecret Name of an existing secret that contains the certificates ## certificatesSecret: "" ## @param tls.certFilename Certificate filename ## certFilename: "" ## @param tls.certKeyFilename Certificate key filename ## certKeyFilename: "" ## @param tls.certCAFilename CA Certificate filename ## If provided, PostgreSQL will authenticate TLS/SSL clients by requesting them a certificate ## ref: https://www.postgresql.org/docs/9.6/auth-methods.html ## certCAFilename: "" ## @param tls.crlFilename File containing a Certificate Revocation List ## crlFilename: "" ## @section PostgreSQL Primary parameters ## primary: ## @param primary.configuration PostgreSQL Primary main configuration to be injected as ConfigMap ## ref: https://www.postgresql.org/docs/current/static/runtime-config.html ## configuration: "" ## @param primary.pgHbaConfiguration PostgreSQL Primary client authentication configuration ## ref: https://www.postgresql.org/docs/current/static/auth-pg-hba-conf.html ## e.g:# ## pgHbaConfiguration: |- ## local all all trust ## host all all localhost trust ## host mydatabase mysuser 192.168.0.0/24 md5 ## pgHbaConfiguration: "" ## @param primary.existingConfigmap Name of an existing ConfigMap with PostgreSQL Primary configuration ## NOTE: `primary.configuration` and `primary.pgHbaConfiguration` will be ignored ## existingConfigmap: "" ## @param primary.extendedConfiguration Extended PostgreSQL Primary configuration (appended to main or default configuration) ## ref: https://github.com/bitnami/bitnami-docker-postgresql#allow-settings-to-be-loaded-from-files-other-than-the-default-postgresqlconf ## extendedConfiguration: "" ## @param primary.existingExtendedConfigmap Name of an existing ConfigMap with PostgreSQL Primary extended configuration ## NOTE: `primary.extendedConfiguration` will be ignored ## existingExtendedConfigmap: "" ## Initdb configuration ## ref: https://github.com/bitnami/bitnami-docker-postgresql/blob/master/README.md#specifying-initdb-arguments ## initdb: ## @param primary.initdb.args PostgreSQL initdb extra arguments ## args: "" ## @param primary.initdb.postgresqlWalDir Specify a custom location for the PostgreSQL transaction log ## postgresqlWalDir: "" ## @param primary.initdb.scripts Dictionary of initdb scripts ## Specify dictionary of scripts to be run at first boot ## e.g: ## scripts: ## my_init_script.sh: | ## #!/bin/sh ## echo "Do something." ## scripts: {} ## @param primary.initdb.scriptsConfigMap ConfigMap with scripts to be run at first boot ## NOTE: This will override `primary.initdb.scripts` ## scriptsConfigMap: "" ## @param primary.initdb.scriptsSecret Secret with scripts to be run at first boot (in case it contains sensitive information) ## NOTE: This can work along `primary.initdb.scripts` or `primary.initdb.scriptsConfigMap` ## scriptsSecret: "" ## @param primary.initdb.user Specify the PostgreSQL username to execute the initdb scripts ## user: "" ## @param primary.initdb.password Specify the PostgreSQL password to execute the initdb scripts ## password: "" ## Configure current cluster's primary server to be the standby server in other cluster. ## This will allow cross cluster replication and provide cross cluster high availability. ## You will need to configure pgHbaConfiguration if you want to enable this feature with local cluster replication enabled. ## @param primary.standby.enabled Whether to enable current cluster's primary as standby server of another cluster or not ## @param primary.standby.primaryHost The Host of replication primary in the other cluster ## @param primary.standby.primaryPort The Port of replication primary in the other cluster ## standby: enabled: false primaryHost: "" primaryPort: "" ## @param primary.extraEnvVars Array with extra environment variables to add to PostgreSQL Primary nodes ## e.g: ## extraEnvVars: ## - name: FOO ## value: "bar" ## extraEnvVars: [] ## @param primary.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for PostgreSQL Primary nodes ## extraEnvVarsCM: "" ## @param primary.extraEnvVarsSecret Name of existing Secret containing extra env vars for PostgreSQL Primary nodes ## extraEnvVarsSecret: "" ## @param primary.command Override default container command (useful when using custom images) ## command: [] ## @param primary.args Override default container args (useful when using custom images) ## args: [] ## Configure extra options for PostgreSQL Primary containers' liveness, readiness and startup probes ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes ## @param primary.livenessProbe.enabled Enable livenessProbe on PostgreSQL Primary containers ## @param primary.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe ## @param primary.livenessProbe.periodSeconds Period seconds for livenessProbe ## @param primary.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe ## @param primary.livenessProbe.failureThreshold Failure threshold for livenessProbe ## @param primary.livenessProbe.successThreshold Success threshold for livenessProbe ## livenessProbe: enabled: true initialDelaySeconds: 30 periodSeconds: 10 timeoutSeconds: 5 failureThreshold: 6 successThreshold: 1 ## @param primary.readinessProbe.enabled Enable readinessProbe on PostgreSQL Primary containers ## @param primary.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe ## @param primary.readinessProbe.periodSeconds Period seconds for readinessProbe ## @param primary.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe ## @param primary.readinessProbe.failureThreshold Failure threshold for readinessProbe ## @param primary.readinessProbe.successThreshold Success threshold for readinessProbe ## readinessProbe: enabled: true initialDelaySeconds: 5 periodSeconds: 10 timeoutSeconds: 5 failureThreshold: 6 successThreshold: 1 ## @param primary.startupProbe.enabled Enable startupProbe on PostgreSQL Primary containers ## @param primary.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe ## @param primary.startupProbe.periodSeconds Period seconds for startupProbe ## @param primary.startupProbe.timeoutSeconds Timeout seconds for startupProbe ## @param primary.startupProbe.failureThreshold Failure threshold for startupProbe ## @param primary.startupProbe.successThreshold Success threshold for startupProbe ## startupProbe: enabled: false initialDelaySeconds: 30 periodSeconds: 10 timeoutSeconds: 1 failureThreshold: 15 successThreshold: 1 ## @param primary.customLivenessProbe Custom livenessProbe that overrides the default one ## customLivenessProbe: {} ## @param primary.customReadinessProbe Custom readinessProbe that overrides the default one ## customReadinessProbe: {} ## @param primary.customStartupProbe Custom startupProbe that overrides the default one ## customStartupProbe: {} ## @param primary.lifecycleHooks for the PostgreSQL Primary container to automate configuration before or after startup ## lifecycleHooks: {} ## PostgreSQL Primary resource requests and limits ## ref: https://kubernetes.io/docs/user-guide/compute-resources/ ## @param primary.resources.limits The resources limits for the PostgreSQL Primary containers ## @param primary.resources.requests.memory The requested memory for the PostgreSQL Primary containers ## @param primary.resources.requests.cpu The requested cpu for the PostgreSQL Primary containers ## resources: limits: {} requests: memory: 256Mi cpu: 250m ## Pod Security Context ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ ## @param primary.podSecurityContext.enabled Enable security context ## @param primary.podSecurityContext.fsGroup Group ID for the pod ## podSecurityContext: enabled: true fsGroup: 1001 ## Container Security Context ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ ## @param primary.containerSecurityContext.enabled Enable container security context ## @param primary.containerSecurityContext.runAsUser User ID for the container ## containerSecurityContext: enabled: true runAsUser: 1001 ## @param primary.hostAliases PostgreSQL primary pods host aliases ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/ ## hostAliases: [] ## @param primary.hostNetwork Specify if host network should be enabled for PostgreSQL pod (postgresql primary) ## hostNetwork: false ## @param primary.hostIPC Specify if host IPC should be enabled for PostgreSQL pod (postgresql primary) ## hostIPC: false ## @param primary.labels Map of labels to add to the statefulset (postgresql primary) ## labels: {} ## @param primary.annotations Annotations for PostgreSQL primary pods ## annotations: {} ## @param primary.podLabels Map of labels to add to the pods (postgresql primary) ## podLabels: {} ## @param primary.podAnnotations Map of annotations to add to the pods (postgresql primary) ## podAnnotations: {} ## @param primary.podAffinityPreset PostgreSQL primary pod affinity preset. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard` ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity ## podAffinityPreset: "" ## @param primary.podAntiAffinityPreset PostgreSQL primary pod anti-affinity preset. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard` ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity ## podAntiAffinityPreset: soft ## PostgreSQL Primary node affinity preset ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity ## nodeAffinityPreset: ## @param primary.nodeAffinityPreset.type PostgreSQL primary node affinity preset type. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard` ## type: "" ## @param primary.nodeAffinityPreset.key PostgreSQL primary node label key to match Ignored if `primary.affinity` is set. ## E.g. ## key: "kubernetes.io/e2e-az-name" ## key: "" ## @param primary.nodeAffinityPreset.values PostgreSQL primary node label values to match. Ignored if `primary.affinity` is set. ## E.g. ## values: ## - e2e-az1 ## - e2e-az2 ## values: [] ## @param primary.affinity Affinity for PostgreSQL primary pods assignment ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity ## Note: primary.podAffinityPreset, primary.podAntiAffinityPreset, and primary.nodeAffinityPreset will be ignored when it's set ## affinity: {} ## @param primary.nodeSelector Node labels for PostgreSQL primary pods assignment ## ref: https://kubernetes.io/docs/user-guide/node-selection/ ## nodeSelector: {} ## @param primary.tolerations Tolerations for PostgreSQL primary pods assignment ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/ ## tolerations: [] ## @param primary.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods ## topologySpreadConstraints: [] ## @param primary.priorityClassName Priority Class to use for each pod (postgresql primary) ## priorityClassName: "" ## @param primary.schedulerName Use an alternate scheduler, e.g. "stork". ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/ ## schedulerName: "" ## @param primary.terminationGracePeriodSeconds Seconds PostgreSQL primary pod needs to terminate gracefully ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods ## terminationGracePeriodSeconds: "" ## @param primary.updateStrategy.type PostgreSQL Primary statefulset strategy type ## @param primary.updateStrategy.rollingUpdate PostgreSQL Primary statefulset rolling update configuration parameters ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies ## updateStrategy: type: RollingUpdate rollingUpdate: {} ## @param primary.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the PostgreSQL Primary container(s) ## extraVolumeMounts: [] ## @param primary.extraVolumes Optionally specify extra list of additional volumes for the PostgreSQL Primary pod(s) ## extraVolumes: [] ## @param primary.sidecars Add additional sidecar containers to the PostgreSQL Primary pod(s) ## For example: ## sidecars: ## - name: your-image-name ## image: your-image ## imagePullPolicy: Always ## ports: ## - name: portname ## containerPort: 1234 ## sidecars: [] ## @param primary.initContainers Add additional init containers to the PostgreSQL Primary pod(s) ## Example ## ## initContainers: ## - name: do-something ## image: busybox ## command: ['do', 'something'] ## initContainers: [] ## @param primary.extraPodSpec Optionally specify extra PodSpec for the PostgreSQL Primary pod(s) ## extraPodSpec: {} ## PostgreSQL Primary service configuration ## service: ## @param primary.service.type Kubernetes Service type ## type: ClusterIP ## @param primary.service.ports.postgresql PostgreSQL service port ## ports: postgresql: 5432 ## Node ports to expose ## NOTE: choose port between <30000-32767> ## @param primary.service.nodePorts.postgresql Node port for PostgreSQL ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport ## nodePorts: postgresql: "" ## @param primary.service.clusterIP Static clusterIP or None for headless services ## e.g: ## clusterIP: None ## clusterIP: "" ## @param primary.service.annotations Annotations for PostgreSQL primary service ## annotations: {} ## @param primary.service.loadBalancerIP Load balancer IP if service type is `LoadBalancer` ## Set the LoadBalancer service type to internal only ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer ## loadBalancerIP: "" ## @param primary.service.externalTrafficPolicy Enable client source IP preservation ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip ## externalTrafficPolicy: Cluster ## @param primary.service.loadBalancerSourceRanges Addresses that are allowed when service is LoadBalancer ## https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service ## ## loadBalancerSourceRanges: ## - 10.10.10.0/24 ## loadBalancerSourceRanges: [] ## @param primary.service.extraPorts Extra ports to expose in the PostgreSQL primary service ## extraPorts: [] ## @param primary.service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP" ## If "ClientIP", consecutive client requests will be directed to the same Pod ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies ## sessionAffinity: None ## @param primary.service.sessionAffinityConfig Additional settings for the sessionAffinity ## sessionAffinityConfig: ## clientIP: ## timeoutSeconds: 300 ## sessionAffinityConfig: {} ## PostgreSQL Primary persistence configuration ## persistence: ## @param primary.persistence.enabled Enable PostgreSQL Primary data persistence using PVC ## enabled: true ## @param primary.persistence.existingClaim Name of an existing PVC to use ## existingClaim: "" ## @param primary.persistence.mountPath The path the volume will be mounted at ## Note: useful when using custom PostgreSQL images ## mountPath: /bitnami/postgresql ## @param primary.persistence.subPath The subdirectory of the volume to mount to ## Useful in dev environments and one PV for multiple services ## subPath: "" ## @param primary.persistence.storageClass PVC Storage Class for PostgreSQL Primary data volume ## If defined, storageClassName: ## If set to "-", storageClassName: "", which disables dynamic provisioning ## If undefined (the default) or set to null, no storageClassName spec is ## set, choosing the default provisioner. (gp2 on AWS, standard on ## GKE, AWS & OpenStack) ## storageClass: "" ## @param primary.persistence.accessModes PVC Access Mode for PostgreSQL volume ## accessModes: - ReadWriteOnce ## @param primary.persistence.size PVC Storage Request for PostgreSQL volume ## size: 200Gi ## @param primary.persistence.annotations Annotations for the PVC ## annotations: {} ## @param primary.persistence.selector Selector to match an existing Persistent Volume (this value is evaluated as a template) ## selector: ## matchLabels: ## app: my-app ## selector: {} ## @param primary.persistence.dataSource Custom PVC data source ## dataSource: {} ## @section PostgreSQL read only replica parameters ## readReplicas: ## @param readReplicas.replicaCount Number of PostgreSQL read only replicas ## replicaCount: 1 ## @param readReplicas.extraEnvVars Array with extra environment variables to add to PostgreSQL read only nodes ## e.g: ## extraEnvVars: ## - name: FOO ## value: "bar" ## extraEnvVars: [] ## @param readReplicas.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for PostgreSQL read only nodes ## extraEnvVarsCM: "" ## @param readReplicas.extraEnvVarsSecret Name of existing Secret containing extra env vars for PostgreSQL read only nodes ## extraEnvVarsSecret: "" ## @param readReplicas.command Override default container command (useful when using custom images) ## command: [] ## @param readReplicas.args Override default container args (useful when using custom images) ## args: [] ## Configure extra options for PostgreSQL read only containers' liveness, readiness and startup probes ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes ## @param readReplicas.livenessProbe.enabled Enable livenessProbe on PostgreSQL read only containers ## @param readReplicas.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe ## @param readReplicas.livenessProbe.periodSeconds Period seconds for livenessProbe ## @param readReplicas.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe ## @param readReplicas.livenessProbe.failureThreshold Failure threshold for livenessProbe ## @param readReplicas.livenessProbe.successThreshold Success threshold for livenessProbe ## livenessProbe: enabled: true initialDelaySeconds: 30 periodSeconds: 10 timeoutSeconds: 5 failureThreshold: 6 successThreshold: 1 ## @param readReplicas.readinessProbe.enabled Enable readinessProbe on PostgreSQL read only containers ## @param readReplicas.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe ## @param readReplicas.readinessProbe.periodSeconds Period seconds for readinessProbe ## @param readReplicas.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe ## @param readReplicas.readinessProbe.failureThreshold Failure threshold for readinessProbe ## @param readReplicas.readinessProbe.successThreshold Success threshold for readinessProbe ## readinessProbe: enabled: true initialDelaySeconds: 5 periodSeconds: 10 timeoutSeconds: 5 failureThreshold: 6 successThreshold: 1 ## @param readReplicas.startupProbe.enabled Enable startupProbe on PostgreSQL read only containers ## @param readReplicas.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe ## @param readReplicas.startupProbe.periodSeconds Period seconds for startupProbe ## @param readReplicas.startupProbe.timeoutSeconds Timeout seconds for startupProbe ## @param readReplicas.startupProbe.failureThreshold Failure threshold for startupProbe ## @param readReplicas.startupProbe.successThreshold Success threshold for startupProbe ## startupProbe: enabled: false initialDelaySeconds: 30 periodSeconds: 10 timeoutSeconds: 1 failureThreshold: 15 successThreshold: 1 ## @param readReplicas.customLivenessProbe Custom livenessProbe that overrides the default one ## customLivenessProbe: {} ## @param readReplicas.customReadinessProbe Custom readinessProbe that overrides the default one ## customReadinessProbe: {} ## @param readReplicas.customStartupProbe Custom startupProbe that overrides the default one ## customStartupProbe: {} ## @param readReplicas.lifecycleHooks for the PostgreSQL read only container to automate configuration before or after startup ## lifecycleHooks: {} ## PostgreSQL read only resource requests and limits ## ref: https://kubernetes.io/docs/user-guide/compute-resources/ ## @param readReplicas.resources.limits The resources limits for the PostgreSQL read only containers ## @param readReplicas.resources.requests.memory The requested memory for the PostgreSQL read only containers ## @param readReplicas.resources.requests.cpu The requested cpu for the PostgreSQL read only containers ## resources: limits: {} requests: memory: 256Mi cpu: 250m ## Pod Security Context ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ ## @param readReplicas.podSecurityContext.enabled Enable security context ## @param readReplicas.podSecurityContext.fsGroup Group ID for the pod ## podSecurityContext: enabled: true fsGroup: 1001 ## Container Security Context ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ ## @param readReplicas.containerSecurityContext.enabled Enable container security context ## @param readReplicas.containerSecurityContext.runAsUser User ID for the container ## containerSecurityContext: enabled: true runAsUser: 1001 ## @param readReplicas.hostAliases PostgreSQL read only pods host aliases ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/ ## hostAliases: [] ## @param readReplicas.hostNetwork Specify if host network should be enabled for PostgreSQL pod (PostgreSQL read only) ## hostNetwork: false ## @param readReplicas.hostIPC Specify if host IPC should be enabled for PostgreSQL pod (postgresql primary) ## hostIPC: false ## @param readReplicas.labels Map of labels to add to the statefulset (PostgreSQL read only) ## labels: {} ## @param readReplicas.annotations Annotations for PostgreSQL read only pods ## annotations: {} ## @param readReplicas.podLabels Map of labels to add to the pods (PostgreSQL read only) ## podLabels: {} ## @param readReplicas.podAnnotations Map of annotations to add to the pods (PostgreSQL read only) ## podAnnotations: {} ## @param readReplicas.podAffinityPreset PostgreSQL read only pod affinity preset. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard` ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity ## podAffinityPreset: "" ## @param readReplicas.podAntiAffinityPreset PostgreSQL read only pod anti-affinity preset. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard` ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity ## podAntiAffinityPreset: soft ## PostgreSQL read only node affinity preset ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity ## nodeAffinityPreset: ## @param readReplicas.nodeAffinityPreset.type PostgreSQL read only node affinity preset type. Ignored if `primary.affinity` is set. Allowed values: `soft` or `hard` ## type: "" ## @param readReplicas.nodeAffinityPreset.key PostgreSQL read only node label key to match Ignored if `primary.affinity` is set. ## E.g. ## key: "kubernetes.io/e2e-az-name" ## key: "" ## @param readReplicas.nodeAffinityPreset.values PostgreSQL read only node label values to match. Ignored if `primary.affinity` is set. ## E.g. ## values: ## - e2e-az1 ## - e2e-az2 ## values: [] ## @param readReplicas.affinity Affinity for PostgreSQL read only pods assignment ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity ## Note: primary.podAffinityPreset, primary.podAntiAffinityPreset, and primary.nodeAffinityPreset will be ignored when it's set ## affinity: {} ## @param readReplicas.nodeSelector Node labels for PostgreSQL read only pods assignment ## ref: https://kubernetes.io/docs/user-guide/node-selection/ ## nodeSelector: {} ## @param readReplicas.tolerations Tolerations for PostgreSQL read only pods assignment ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/ ## tolerations: [] ## @param readReplicas.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods ## topologySpreadConstraints: [] ## @param readReplicas.priorityClassName Priority Class to use for each pod (PostgreSQL read only) ## priorityClassName: "" ## @param readReplicas.schedulerName Use an alternate scheduler, e.g. "stork". ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/ ## schedulerName: "" ## @param readReplicas.terminationGracePeriodSeconds Seconds PostgreSQL read only pod needs to terminate gracefully ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods ## terminationGracePeriodSeconds: "" ## @param readReplicas.updateStrategy.type PostgreSQL read only statefulset strategy type ## @param readReplicas.updateStrategy.rollingUpdate PostgreSQL read only statefulset rolling update configuration parameters ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies ## updateStrategy: type: RollingUpdate rollingUpdate: {} ## @param readReplicas.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the PostgreSQL read only container(s) ## extraVolumeMounts: [] ## @param readReplicas.extraVolumes Optionally specify extra list of additional volumes for the PostgreSQL read only pod(s) ## extraVolumes: [] ## @param readReplicas.sidecars Add additional sidecar containers to the PostgreSQL read only pod(s) ## For example: ## sidecars: ## - name: your-image-name ## image: your-image ## imagePullPolicy: Always ## ports: ## - name: portname ## containerPort: 1234 ## sidecars: [] ## @param readReplicas.initContainers Add additional init containers to the PostgreSQL read only pod(s) ## Example ## ## initContainers: ## - name: do-something ## image: busybox ## command: ['do', 'something'] ## initContainers: [] ## @param readReplicas.extraPodSpec Optionally specify extra PodSpec for the PostgreSQL read only pod(s) ## extraPodSpec: {} ## PostgreSQL read only service configuration ## service: ## @param readReplicas.service.type Kubernetes Service type ## type: ClusterIP ## @param readReplicas.service.ports.postgresql PostgreSQL service port ## ports: postgresql: 5432 ## Node ports to expose ## NOTE: choose port between <30000-32767> ## @param readReplicas.service.nodePorts.postgresql Node port for PostgreSQL ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport ## nodePorts: postgresql: "" ## @param readReplicas.service.clusterIP Static clusterIP or None for headless services ## e.g: ## clusterIP: None ## clusterIP: "" ## @param readReplicas.service.annotations Annotations for PostgreSQL read only service ## annotations: {} ## @param readReplicas.service.loadBalancerIP Load balancer IP if service type is `LoadBalancer` ## Set the LoadBalancer service type to internal only ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer ## loadBalancerIP: "" ## @param readReplicas.service.externalTrafficPolicy Enable client source IP preservation ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip ## externalTrafficPolicy: Cluster ## @param readReplicas.service.loadBalancerSourceRanges Addresses that are allowed when service is LoadBalancer ## https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service ## ## loadBalancerSourceRanges: ## - 10.10.10.0/24 ## loadBalancerSourceRanges: [] ## @param readReplicas.service.extraPorts Extra ports to expose in the PostgreSQL read only service ## extraPorts: [] ## @param readReplicas.service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP" ## If "ClientIP", consecutive client requests will be directed to the same Pod ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies ## sessionAffinity: None ## @param readReplicas.service.sessionAffinityConfig Additional settings for the sessionAffinity ## sessionAffinityConfig: ## clientIP: ## timeoutSeconds: 300 ## sessionAffinityConfig: {} ## PostgreSQL read only persistence configuration ## persistence: ## @param readReplicas.persistence.enabled Enable PostgreSQL read only data persistence using PVC ## enabled: true ## @param readReplicas.persistence.mountPath The path the volume will be mounted at ## Note: useful when using custom PostgreSQL images ## mountPath: /bitnami/postgresql ## @param readReplicas.persistence.subPath The subdirectory of the volume to mount to ## Useful in dev environments and one PV for multiple services ## subPath: "" ## @param readReplicas.persistence.storageClass PVC Storage Class for PostgreSQL read only data volume ## If defined, storageClassName: ## If set to "-", storageClassName: "", which disables dynamic provisioning ## If undefined (the default) or set to null, no storageClassName spec is ## set, choosing the default provisioner. (gp2 on AWS, standard on ## GKE, AWS & OpenStack) ## storageClass: "" ## @param readReplicas.persistence.accessModes PVC Access Mode for PostgreSQL volume ## accessModes: - ReadWriteOnce ## @param readReplicas.persistence.size PVC Storage Request for PostgreSQL volume ## size: 8Gi ## @param readReplicas.persistence.annotations Annotations for the PVC ## annotations: {} ## @param readReplicas.persistence.selector Selector to match an existing Persistent Volume (this value is evaluated as a template) ## selector: ## matchLabels: ## app: my-app ## selector: {} ## @param readReplicas.persistence.dataSource Custom PVC data source ## dataSource: {} ## @section NetworkPolicy parameters ## Add networkpolicies ## networkPolicy: ## @param networkPolicy.enabled Enable network policies ## enabled: false ## @param networkPolicy.metrics.enabled Enable network policies for metrics (prometheus) ## @param networkPolicy.metrics.namespaceSelector [object] Monitoring namespace selector labels. These labels will be used to identify the prometheus' namespace. ## @param networkPolicy.metrics.podSelector [object] Monitoring pod selector labels. These labels will be used to identify the Prometheus pods. ## metrics: enabled: false ## e.g: ## namespaceSelector: ## label: monitoring ## namespaceSelector: {} ## e.g: ## podSelector: ## label: monitoring ## podSelector: {} ## Ingress Rules ## ingressRules: ## @param networkPolicy.ingressRules.primaryAccessOnlyFrom.enabled Enable ingress rule that makes PostgreSQL primary node only accessible from a particular origin. ## @param networkPolicy.ingressRules.primaryAccessOnlyFrom.namespaceSelector [object] Namespace selector label that is allowed to access the PostgreSQL primary node. This label will be used to identified the allowed namespace(s). ## @param networkPolicy.ingressRules.primaryAccessOnlyFrom.podSelector [object] Pods selector label that is allowed to access the PostgreSQL primary node. This label will be used to identified the allowed pod(s). ## @param networkPolicy.ingressRules.primaryAccessOnlyFrom.customRules [object] Custom network policy for the PostgreSQL primary node. ## primaryAccessOnlyFrom: enabled: false ## e.g: ## namespaceSelector: ## label: ingress ## namespaceSelector: {} ## e.g: ## podSelector: ## label: access ## podSelector: {} ## custom ingress rules ## e.g: ## customRules: ## - from: ## - namespaceSelector: ## matchLabels: ## label: example customRules: {} ## @param networkPolicy.ingressRules.readReplicasAccessOnlyFrom.enabled Enable ingress rule that makes PostgreSQL read-only nodes only accessible from a particular origin. ## @param networkPolicy.ingressRules.readReplicasAccessOnlyFrom.namespaceSelector [object] Namespace selector label that is allowed to access the PostgreSQL read-only nodes. This label will be used to identified the allowed namespace(s). ## @param networkPolicy.ingressRules.readReplicasAccessOnlyFrom.podSelector [object] Pods selector label that is allowed to access the PostgreSQL read-only nodes. This label will be used to identified the allowed pod(s). ## @param networkPolicy.ingressRules.readReplicasAccessOnlyFrom.customRules [object] Custom network policy for the PostgreSQL read-only nodes. ## readReplicasAccessOnlyFrom: enabled: false ## e.g: ## namespaceSelector: ## label: ingress ## namespaceSelector: {} ## e.g: ## podSelector: ## label: access ## podSelector: {} ## custom ingress rules ## e.g: ## CustomRules: ## - from: ## - namespaceSelector: ## matchLabels: ## label: example customRules: {} ## @param networkPolicy.egressRules.denyConnectionsToExternal Enable egress rule that denies outgoing traffic outside the cluster, except for DNS (port 53). ## @param networkPolicy.egressRules.customRules [object] Custom network policy rule ## egressRules: # Deny connections to external. This is not compatible with an external database. denyConnectionsToExternal: false ## Additional custom egress rules ## e.g: ## customRules: ## - to: ## - namespaceSelector: ## matchLabels: ## label: example customRules: {} ## @section Volume Permissions parameters ## Init containers parameters: ## volumePermissions: Change the owner and group of the persistent volume(s) mountpoint(s) to 'runAsUser:fsGroup' on each node ## volumePermissions: ## @param volumePermissions.enabled Enable init container that changes the owner and group of the persistent volume ## enabled: false ## @param volumePermissions.image.registry Init container volume-permissions image registry ## @param volumePermissions.image.repository Init container volume-permissions image repository ## @param volumePermissions.image.tag Init container volume-permissions image tag (immutable tags are recommended) ## @param volumePermissions.image.pullPolicy Init container volume-permissions image pull policy ## @param volumePermissions.image.pullSecrets Init container volume-permissions image pull secrets ## image: registry: docker.io repository: bitnami/bitnami-shell tag: 11-debian-11-r5 pullPolicy: IfNotPresent ## Optionally specify an array of imagePullSecrets. ## Secrets must be manually created in the namespace. ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/ ## Example: ## pullSecrets: ## - myRegistryKeySecretName ## pullSecrets: [] ## Init container resource requests and limits ## ref: https://kubernetes.io/docs/user-guide/compute-resources/ ## @param volumePermissions.resources.limits Init container volume-permissions resource limits ## @param volumePermissions.resources.requests Init container volume-permissions resource requests ## resources: limits: {} requests: {} ## Init container' Security Context ## Note: the chown of the data folder is done to containerSecurityContext.runAsUser ## and not the below volumePermissions.containerSecurityContext.runAsUser ## @param volumePermissions.containerSecurityContext.runAsUser User ID for the init container ## containerSecurityContext: runAsUser: 0 ## @section Other Parameters ## Service account for PostgreSQL to use. ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/ ## serviceAccount: ## @param serviceAccount.create Enable creation of ServiceAccount for PostgreSQL pod ## create: false ## @param serviceAccount.name The name of the ServiceAccount to use. ## If not set and create is true, a name is generated using the common.names.fullname template ## name: "" ## @param serviceAccount.automountServiceAccountToken Allows auto mount of ServiceAccountToken on the serviceAccount created ## Can be set to false if pods using this serviceAccount do not need to use K8s API ## automountServiceAccountToken: true ## @param serviceAccount.annotations Additional custom annotations for the ServiceAccount ## annotations: {} ## Creates role for ServiceAccount ## @param rbac.create Create Role and RoleBinding (required for PSP to work) ## rbac: create: false ## @param rbac.rules Custom RBAC rules to set ## e.g: ## rules: ## - apiGroups: ## - "" ## resources: ## - pods ## verbs: ## - get ## - list ## rules: [] ## Pod Security Policy ## ref: https://kubernetes.io/docs/concepts/policy/pod-security-policy/ ## @param psp.create Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later ## psp: create: false ## @section Metrics Parameters metrics: ## @param metrics.enabled Start a prometheus exporter ## enabled: false ## @param metrics.image.registry PostgreSQL Prometheus Exporter image registry ## @param metrics.image.repository PostgreSQL Prometheus Exporter image repository ## @param metrics.image.tag PostgreSQL Prometheus Exporter image tag (immutable tags are recommended) ## @param metrics.image.pullPolicy PostgreSQL Prometheus Exporter image pull policy ## @param metrics.image.pullSecrets Specify image pull secrets ## image: registry: docker.io repository: bitnami/postgres-exporter tag: 0.10.1-debian-11-r6 pullPolicy: IfNotPresent ## Optionally specify an array of imagePullSecrets. ## Secrets must be manually created in the namespace. ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/ ## Example: ## pullSecrets: ## - myRegistryKeySecretName ## pullSecrets: [] ## @param metrics.customMetrics Define additional custom metrics ## ref: https://github.com/wrouesnel/postgres_exporter#adding-new-metrics-via-a-config-file ## customMetrics: ## pg_database: ## query: "SELECT d.datname AS name, CASE WHEN pg_catalog.has_database_privilege(d.datname, 'CONNECT') THEN pg_catalog.pg_database_size(d.datname) ELSE 0 END AS size_bytes FROM pg_catalog.pg_database d where datname not in ('template0', 'template1', 'postgres')" ## metrics: ## - name: ## usage: "LABEL" ## description: "Name of the database" ## - size_bytes: ## usage: "GAUGE" ## description: "Size of the database in bytes" ## customMetrics: {} ## @param metrics.extraEnvVars Extra environment variables to add to PostgreSQL Prometheus exporter ## see: https://github.com/wrouesnel/postgres_exporter#environment-variables ## For example: ## extraEnvVars: ## - name: PG_EXPORTER_DISABLE_DEFAULT_METRICS ## value: "true" ## extraEnvVars: [] ## PostgreSQL Prometheus exporter containers' Security Context ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container ## @param metrics.containerSecurityContext.enabled Enable PostgreSQL Prometheus exporter containers' Security Context ## @param metrics.containerSecurityContext.runAsUser Set PostgreSQL Prometheus exporter containers' Security Context runAsUser ## @param metrics.containerSecurityContext.runAsNonRoot Set PostgreSQL Prometheus exporter containers' Security Context runAsNonRoot ## containerSecurityContext: enabled: true runAsUser: 1001 runAsNonRoot: true ## Configure extra options for PostgreSQL Prometheus exporter containers' liveness, readiness and startup probes ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes ## @param metrics.livenessProbe.enabled Enable livenessProbe on PostgreSQL Prometheus exporter containers ## @param metrics.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe ## @param metrics.livenessProbe.periodSeconds Period seconds for livenessProbe ## @param metrics.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe ## @param metrics.livenessProbe.failureThreshold Failure threshold for livenessProbe ## @param metrics.livenessProbe.successThreshold Success threshold for livenessProbe ## livenessProbe: enabled: true initialDelaySeconds: 5 periodSeconds: 10 timeoutSeconds: 5 failureThreshold: 6 successThreshold: 1 ## @param metrics.readinessProbe.enabled Enable readinessProbe on PostgreSQL Prometheus exporter containers ## @param metrics.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe ## @param metrics.readinessProbe.periodSeconds Period seconds for readinessProbe ## @param metrics.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe ## @param metrics.readinessProbe.failureThreshold Failure threshold for readinessProbe ## @param metrics.readinessProbe.successThreshold Success threshold for readinessProbe ## readinessProbe: enabled: true initialDelaySeconds: 5 periodSeconds: 10 timeoutSeconds: 5 failureThreshold: 6 successThreshold: 1 ## @param metrics.startupProbe.enabled Enable startupProbe on PostgreSQL Prometheus exporter containers ## @param metrics.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe ## @param metrics.startupProbe.periodSeconds Period seconds for startupProbe ## @param metrics.startupProbe.timeoutSeconds Timeout seconds for startupProbe ## @param metrics.startupProbe.failureThreshold Failure threshold for startupProbe ## @param metrics.startupProbe.successThreshold Success threshold for startupProbe ## startupProbe: enabled: false initialDelaySeconds: 10 periodSeconds: 10 timeoutSeconds: 1 failureThreshold: 15 successThreshold: 1 ## @param metrics.customLivenessProbe Custom livenessProbe that overrides the default one ## customLivenessProbe: {} ## @param metrics.customReadinessProbe Custom readinessProbe that overrides the default one ## customReadinessProbe: {} ## @param metrics.customStartupProbe Custom startupProbe that overrides the default one ## customStartupProbe: {} ## @param metrics.containerPorts.metrics PostgreSQL Prometheus exporter metrics container port ## containerPorts: metrics: 9187 ## PostgreSQL Prometheus exporter resource requests and limits ## ref: https://kubernetes.io/docs/user-guide/compute-resources/ ## @param metrics.resources.limits The resources limits for the PostgreSQL Prometheus exporter container ## @param metrics.resources.requests The requested resources for the PostgreSQL Prometheus exporter container ## resources: limits: {} requests: {} ## Service configuration ## service: ## @param metrics.service.ports.metrics PostgreSQL Prometheus Exporter service port ## ports: metrics: 9187 ## @param metrics.service.clusterIP Static clusterIP or None for headless services ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#choosing-your-own-ip-address ## clusterIP: "" ## @param metrics.service.sessionAffinity Control where client requests go, to the same pod or round-robin ## Values: ClientIP or None ## ref: https://kubernetes.io/docs/user-guide/services/ ## sessionAffinity: None ## @param metrics.service.annotations [object] Annotations for Prometheus to auto-discover the metrics endpoint ## annotations: prometheus.io/scrape: "true" prometheus.io/port: "{{ .Values.metrics.service.ports.metrics }}" ## Prometheus Operator ServiceMonitor configuration ## serviceMonitor: ## @param metrics.serviceMonitor.enabled Create ServiceMonitor Resource for scraping metrics using Prometheus Operator ## enabled: false ## @param metrics.serviceMonitor.namespace Namespace for the ServiceMonitor Resource (defaults to the Release Namespace) ## namespace: "" ## @param metrics.serviceMonitor.interval Interval at which metrics should be scraped. ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint ## interval: "" ## @param metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint ## scrapeTimeout: "" ## @param metrics.serviceMonitor.labels Additional labels that can be used so ServiceMonitor will be discovered by Prometheus ## labels: {} ## @param metrics.serviceMonitor.selector Prometheus instance selector labels ## ref: https://github.com/bitnami/charts/tree/master/bitnami/prometheus-operator#prometheus-configuration ## selector: {} ## @param metrics.serviceMonitor.relabelings RelabelConfigs to apply to samples before scraping ## relabelings: [] ## @param metrics.serviceMonitor.metricRelabelings MetricRelabelConfigs to apply to samples before ingestion ## metricRelabelings: [] ## @param metrics.serviceMonitor.honorLabels Specify honorLabels parameter to add the scrape endpoint ## honorLabels: false ## @param metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in prometheus. ## jobLabel: "" ## Custom PrometheusRule to be defined ## The value is evaluated as a template, so, for example, the value can depend on .Release or .Chart ## ref: https://github.com/coreos/prometheus-operator#customresourcedefinitions ## prometheusRule: ## @param metrics.prometheusRule.enabled Create a PrometheusRule for Prometheus Operator ## enabled: false ## @param metrics.prometheusRule.namespace Namespace for the PrometheusRule Resource (defaults to the Release Namespace) ## namespace: "" ## @param metrics.prometheusRule.labels Additional labels that can be used so PrometheusRule will be discovered by Prometheus ## labels: {} ## @param metrics.prometheusRule.rules PrometheusRule definitions ## Make sure to constraint the rules to the current postgresql service. ## rules: ## - alert: HugeReplicationLag ## expr: pg_replication_lag{service="{{ printf "%s-metrics" (include "common.names.fullname" .) }}"} / 3600 > 1 ## for: 1m ## labels: ## severity: critical ## annotations: ## description: replication for {{ include "common.names.fullname" . }} PostgreSQL is lagging by {{ "{{ $value }}" }} hour(s). ## summary: PostgreSQL replication is lagging by {{ "{{ $value }}" }} hour(s). ## rules: []