# From https://raw.githubusercontent.com/rook/rook/v1.13.10/deploy/charts/rook-ceph-cluster/values.yaml
# KUBECONFIG=/etc/rancher/k3s/k3s.yaml helm upgrade --namespace rook-ceph rook-ceph-cluster --set operatorNamespace=rook-ceph rook-release/rook-ceph-cluster -f rook/rook-ceph-cluster-values.yaml --version 1.13.10
# Default values for a single rook-ceph cluster
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.

# -- Namespace of the main rook operator
operatorNamespace: rook-ceph

# -- The metadata.name of the CephCluster CR
# @default -- The same as the namespace
clusterName:

# -- Optional override of the target kubernetes version
kubeVersion:

# -- Cluster ceph.conf override
configOverride:
# configOverride: |
#   [global]
#   mon_allow_pool_delete = true
#   osd_pool_default_size = 3
#   osd_pool_default_min_size = 2

# Installs a debugging toolbox deployment
toolbox:
  # -- Enable Ceph debugging pod deployment. See [toolbox](../Troubleshooting/ceph-toolbox.md)
  enabled: true
  # -- Toolbox image, defaults to the image used by the Ceph cluster
  image: #quay.io/ceph/ceph:v18.2.2
  # -- Toolbox tolerations
  tolerations: []
  # -- Toolbox affinity
  affinity: {}
  # -- Toolbox container security context
  containerSecurityContext:
    runAsNonRoot: true
    runAsUser: 2016
    runAsGroup: 2016
    capabilities:
      drop: ["ALL"]
  # -- Toolbox resources
  resources:
    limits:
      memory: "1Gi"
    requests:
      cpu: "100m"
      memory: "128Mi"
  # -- Set the priority class for the toolbox if desired
  priorityClassName:

monitoring:
  # -- Enable Prometheus integration, will also create necessary RBAC rules to allow Operator to create ServiceMonitors.
  # Monitoring requires Prometheus to be pre-installed
  enabled: true
  # -- Whether to create the Prometheus rules for Ceph alerts
  createPrometheusRules: true
  # -- The namespace in which to create the prometheus rules, if different from the rook cluster namespace.
  # If you have multiple rook-ceph clusters in the same k8s cluster, choose the same namespace (ideally, namespace with prometheus
  # deployed) to set rulesNamespaceOverride for all the clusters. Otherwise, you will get duplicate alerts with multiple alert definitions.
  rulesNamespaceOverride:
  # Monitoring settings for external clusters:
  # externalMgrEndpoints: <list of endpoints>
  # externalMgrPrometheusPort: <port>
  # Scrape interval for prometheus
  # interval: 10s
  # allow adding custom labels and annotations to the prometheus rule
  prometheusRule:
    # -- Labels applied to PrometheusRule
    labels: {}
    # -- Annotations applied to PrometheusRule
    annotations: {}

# -- Create & use PSP resources. Set this to the same value as the rook-ceph chart.
pspEnable: true

# imagePullSecrets option allow to pull docker images from private docker registry. Option will be passed to all service accounts.
# imagePullSecrets:
# - name: my-registry-secret

# All values below are taken from the CephCluster CRD
# -- Cluster configuration.
# @default -- See [below](#ceph-cluster-spec)
cephClusterSpec:
  # This cluster spec example is for a converged cluster where all the Ceph daemons are running locally,
  # as in the host-based example (cluster.yaml). For a different configuration such as a
  # PVC-based cluster (cluster-on-pvc.yaml), external cluster (cluster-external.yaml),
  # or stretch cluster (cluster-stretched.yaml), replace this entire `cephClusterSpec`
  # with the specs from those examples.

  # For more details, check https://rook.io/docs/rook/v1.10/CRDs/Cluster/ceph-cluster-crd/
  cephVersion:
    # The container image used to launch the Ceph daemon pods (mon, mgr, osd, mds, rgw).
    # v17 is Quincy, v18 is Reef.
    # RECOMMENDATION: In production, use a specific version tag instead of the general v18 flag, which pulls the latest release and could result in different
    # versions running within the cluster. See tags available at https://hub.docker.com/r/ceph/ceph/tags/.
    # If you want to be more precise, you can always use a timestamp tag such as quay.io/ceph/ceph:v18.2.2-20240311
    # This tag might not contain a new Ceph version, just security fixes from the underlying operating system, which will reduce vulnerabilities
    image: quay.io/ceph/ceph:v18.2.4
    # Whether to allow unsupported versions of Ceph. Currently `quincy`, and `reef` are supported.
    # Future versions such as `squid` (v19) would require this to be set to `true`.
    # Do not set to true in production.
    allowUnsupported: false

  # The path on the host where configuration files will be persisted. Must be specified.
  # Important: if you reinstall the cluster, make sure you delete this directory from each host or else the mons will fail to start on the new cluster.
  # In Minikube, the '/data' directory is configured to persist across reboots. Use "/data/rook" in Minikube environment.
  dataDirHostPath: /var/lib/rook

  # Whether or not upgrade should continue even if a check fails
  # This means Ceph's status could be degraded and we don't recommend upgrading but you might decide otherwise
  # Use at your OWN risk
  # To understand Rook's upgrade process of Ceph, read https://rook.io/docs/rook/v1.10/Upgrade/ceph-upgrade/
  skipUpgradeChecks: false

  # Whether or not continue if PGs are not clean during an upgrade
  continueUpgradeAfterChecksEvenIfNotHealthy: false

  # WaitTimeoutForHealthyOSDInMinutes defines the time (in minutes) the operator would wait before an OSD can be stopped for upgrade or restart.
  # If the timeout exceeds and OSD is not ok to stop, then the operator would skip upgrade for the current OSD and proceed with the next one
  # if `continueUpgradeAfterChecksEvenIfNotHealthy` is `false`. If `continueUpgradeAfterChecksEvenIfNotHealthy` is `true`, then operator would
  # continue with the upgrade of an OSD even if its not ok to stop after the timeout. This timeout won't be applied if `skipUpgradeChecks` is `true`.
  # The default wait timeout is 10 minutes.
  waitTimeoutForHealthyOSDInMinutes: 10

  mon:
    # Set the number of mons to be started. Generally recommended to be 3.
    # For highest availability, an odd number of mons should be specified.
    count: 3
    # The mons should be on unique nodes. For production, at least 3 nodes are recommended for this reason.
    # Mons should only be allowed on the same node for test environments where data loss is acceptable.
    allowMultiplePerNode: false

  mgr:
    # When higher availability of the mgr is needed, increase the count to 2.
    # In that case, one mgr will be active and one in standby. When Ceph updates which
    # mgr is active, Rook will update the mgr services to match the active mgr.
    count: 2
    allowMultiplePerNode: false
    modules:
      # Several modules should not need to be included in this list. The "dashboard" and "monitoring" modules
      # are already enabled by other settings in the cluster CR.
      - name: pg_autoscaler
        enabled: true
      - name: rook
        enabled: true

  # enable the ceph dashboard for viewing cluster status
  dashboard:
    enabled: true
    # serve the dashboard under a subpath (useful when you are accessing the dashboard via a reverse proxy)
    # urlPrefix: /ceph-dashboard
    # serve the dashboard at the given port.
    port: 8080
    # Serve the dashboard using SSL (if using ingress to expose the dashboard and `ssl: true` you need to set
    # the corresponding "backend protocol" annotation(s) for your ingress controller of choice)
    ssl: false

  # Network configuration, see: https://github.com/rook/rook/blob/master/Documentation/CRDs/ceph-cluster-crd.md#network-configuration-settings
  network:
    connections:
      # Whether to encrypt the data in transit across the wire to prevent eavesdropping the data on the network.
      # The default is false. When encryption is enabled, all communication between clients and Ceph daemons, or between Ceph daemons will be encrypted.
      # When encryption is not enabled, clients still establish a strong initial authentication and data integrity is still validated with a crc check.
      # IMPORTANT: Encryption requires the 5.11 kernel for the latest nbd and cephfs drivers. Alternatively for testing only,
      # you can set the "mounter: rbd-nbd" in the rbd storage class, or "mounter: fuse" in the cephfs storage class.
      # The nbd and fuse drivers are *not* recommended in production since restarting the csi driver pod will disconnect the volumes.
      encryption:
        enabled: false
      # Whether to compress the data in transit across the wire. The default is false.
      # Requires Ceph Quincy (v17) or newer. Also see the kernel requirements above for encryption.
      compression:
        enabled: false
      # Whether to require communication over msgr2. If true, the msgr v1 port (6789) will be disabled
      # and clients will be required to connect to the Ceph cluster with the v2 port (3300).
      # Requires a kernel that supports msgr v2 (kernel 5.11 or CentOS 8.4 or newer).
      requireMsgr2: false
    # enable host networking
    provider: host
  #   # EXPERIMENTAL: enable the Multus network provider
  #   provider: multus
  #   selectors:
  #     # The selector keys are required to be `public` and `cluster`.
  #     # Based on the configuration, the operator will do the following:
  #     #   1. if only the `public` selector key is specified both public_network and cluster_network Ceph settings will listen on that interface
  #     #   2. if both `public` and `cluster` selector keys are specified the first one will point to 'public_network' flag and the second one to 'cluster_network'
  #     #
  #     # In order to work, each selector value must match a NetworkAttachmentDefinition object in Multus
  #     #
  #     # public: public-conf --> NetworkAttachmentDefinition object name in Multus
  #     # cluster: cluster-conf --> NetworkAttachmentDefinition object name in Multus
  #   # Provide internet protocol version. IPv6, IPv4 or empty string are valid options. Empty string would mean IPv4
  #   ipFamily: "IPv6"
  #   # Ceph daemons to listen on both IPv4 and Ipv6 networks
  #   dualStack: false

  # enable the crash collector for ceph daemon crash collection
  crashCollector:
    disable: false
    # Uncomment daysToRetain to prune ceph crash entries older than the
    # specified number of days.
    # daysToRetain: 30

  # enable log collector, daemons will log on files and rotate
  logCollector:
    enabled: false
    periodicity: daily # one of: hourly, daily, weekly, monthly
    maxLogSize: 500M # SUFFIX may be 'M' or 'G'. Must be at least 1M.

  # automate [data cleanup process](https://github.com/rook/rook/blob/master/Documentation/Storage-Configuration/ceph-teardown.md#delete-the-data-on-hosts) in cluster destruction.
  cleanupPolicy:
    # Since cluster cleanup is destructive to data, confirmation is required.
    # To destroy all Rook data on hosts during uninstall, confirmation must be set to "yes-really-destroy-data".
    # This value should only be set when the cluster is about to be deleted. After the confirmation is set,
    # Rook will immediately stop configuring the cluster and only wait for the delete command.
    # If the empty string is set, Rook will not destroy any data on hosts during uninstall.
    confirmation: ""
    # sanitizeDisks represents settings for sanitizing OSD disks on cluster deletion
    sanitizeDisks:
      # method indicates if the entire disk should be sanitized or simply ceph's metadata
      # in both case, re-install is possible
      # possible choices are 'complete' or 'quick' (default)
      method: quick
      # dataSource indicate where to get random bytes from to write on the disk
      # possible choices are 'zero' (default) or 'random'
      # using random sources will consume entropy from the system and will take much more time then the zero source
      dataSource: zero
      # iteration overwrite N times instead of the default (1)
      # takes an integer value
      iteration: 1
    # allowUninstallWithVolumes defines how the uninstall should be performed
    # If set to true, cephCluster deletion does not wait for the PVs to be deleted.
    allowUninstallWithVolumes: false

  # To control where various services will be scheduled by kubernetes, use the placement configuration sections below.
  # The example under 'all' would have all services scheduled on kubernetes nodes labeled with 'role=storage-node' and
  # tolerate taints with a key of 'storage-node'.
  placement:
    all:
      nodeAffinity:
        requiredDuringSchedulingIgnoredDuringExecution:
          nodeSelectorTerms:
            - matchExpressions:
              - key: storage-node
                operator: In
                values:
                - "true"
      podAffinity:
      podAntiAffinity:
      topologySpreadConstraints:
      tolerations:
      - key: storage-node
        operator: Exists
  #   # The above placement information can also be specified for mon, osd, and mgr components
  #   mon:
  #   # Monitor deployments may contain an anti-affinity rule for avoiding monitor
  #   # collocation on the same node. This is a required rule when host network is used
  #   # or when AllowMultiplePerNode is false. Otherwise this anti-affinity rule is a
  #   # preferred rule with weight: 50.
  #   osd:
  #   mgr:
  #   cleanup:

  # annotations:
  #   all:
  #   mon:
  #   osd:
  #   cleanup:
  #   prepareosd:
  #   # If no mgr annotations are set, prometheus scrape annotations will be set by default.
  #   mgr:

  # labels:
  #   all:
  #   mon:
  #   osd:
  #   cleanup:
  #   mgr:
  #   prepareosd:
  #   # monitoring is a list of key-value pairs. It is injected into all the monitoring resources created by operator.
  #   # These labels can be passed as LabelSelector to Prometheus
  #   monitoring:

  resources:
    mgr:
      limits:
        cpu: 0
        memory: "1Gi"
      requests:
        cpu: 0
        memory: "512Mi"
    mon:
      limits:
        cpu: 0
        memory: "2Gi"
      requests:
        cpu: 0
        memory: "1Gi"
    osd:
      limits:
        cpu: 0
        memory: "4Gi"
      requests:
        cpu: 0
        memory: "1Gi"
    prepareosd:
      # limits: It is not recommended to set limits on the OSD prepare job
      #         since it's a one-time burst for memory that must be allowed to
      #         complete without an OOM kill.  Note however that if a k8s
      #         limitRange guardrail is defined external to Rook, the lack of
      #         a limit here may result in a sync failure, in which case a
      #         limit should be added.  1200Mi may suffice for up to 15Ti
      #         OSDs ; for larger devices 2Gi may be required.
      #         cf. https://github.com/rook/rook/pull/11103
      requests:
        cpu: 0
        memory: "500Mi"
    mgr-sidecar:
      limits:
        cpu: 0
        memory: "100Mi"
      requests:
        cpu: 0
        memory: "40Mi"
    crashcollector:
      limits:
        cpu: 0
        memory: "60Mi"
      requests:
        cpu: 0
        memory: "60Mi"
    logcollector:
      limits:
        cpu: 0
        memory: "1Gi"
      requests:
        cpu: 0
        memory: "100Mi"
    cleanup:
      limits:
        cpu: 0
        memory: "1Gi"
      requests:
        cpu: 0
        memory: "100Mi"
    exporter:
      limits:
        cpu: 0
        memory: "128Mi"
      requests:
        cpu: 0
        memory: "50Mi"

  # The option to automatically remove OSDs that are out and are safe to destroy.
  removeOSDsIfOutAndSafeToRemove: false

  # priority classes to apply to ceph resources
  priorityClassNames:
    mon: system-node-critical
    osd: system-node-critical
    mgr: system-cluster-critical

  storage: # cluster level storage configuration and selection
    useAllNodes: true
    useAllDevices: true
    # deviceFilter:
    # config:
    #   crushRoot: "custom-root" # specify a non-default root label for the CRUSH map
    #   metadataDevice: "md0" # specify a non-rotational storage so ceph-volume will use it as block db device of bluestore.
    #   databaseSizeMB: "1024" # uncomment if the disks are smaller than 100 GB
    #   osdsPerDevice: "1" # this value can be overridden at the node or device level
    #   encryptedDevice: "true" # the default value for this option is "false"
    # # Individual nodes and their config can be specified as well, but 'useAllNodes' above must be set to false. Then, only the named
    # # nodes below will be used as storage resources. Each node's 'name' field should match their 'kubernetes.io/hostname' label.
    # nodes:
    #   - name: "172.17.4.201"
    #     devices: # specific devices to use for storage can be specified for each node
    #       - name: "sdb"
    #       - name: "nvme01" # multiple osds can be created on high performance devices
    #         config:
    #           osdsPerDevice: "5"
    #       - name: "/dev/disk/by-id/ata-ST4000DM004-XXXX" # devices can be specified using full udev paths
    #     config: # configuration can be specified at the node level which overrides the cluster level config
    #   - name: "172.17.4.301"
    #     deviceFilter: "^sd."

  # The section for configuring management of daemon disruptions during upgrade or fencing.
  disruptionManagement:
    # If true, the operator will create and manage PodDisruptionBudgets for OSD, Mon, RGW, and MDS daemons. OSD PDBs are managed dynamically
    # via the strategy outlined in the [design](https://github.com/rook/rook/blob/master/design/ceph/ceph-managed-disruptionbudgets.md). The operator will
    # block eviction of OSDs by default and unblock them safely when drains are detected.
    managePodBudgets: true
    # A duration in minutes that determines how long an entire failureDomain like `region/zone/host` will be held in `noout` (in addition to the
    # default DOWN/OUT interval) when it is draining. This is only relevant when  `managePodBudgets` is `true`. The default value is `30` minutes.
    osdMaintenanceTimeout: 30
    # A duration in minutes that the operator will wait for the placement groups to become healthy (active+clean) after a drain was completed and OSDs came back up.
    # Operator will continue with the next drain if the timeout exceeds. It only works if `managePodBudgets` is `true`.
    # No values or 0 means that the operator will wait until the placement groups are healthy before unblocking the next drain.
    pgHealthCheckTimeout: 0

  # Configure the healthcheck and liveness probes for ceph pods.
  # Valid values for daemons are 'mon', 'osd', 'status'
  healthCheck:
    daemonHealth:
      mon:
        disabled: false
        interval: 45s
      osd:
        disabled: false
        interval: 60s
      status:
        disabled: false
        interval: 60s
    # Change pod liveness probe, it works for all mon, mgr, and osd pods.
    livenessProbe:
      mon:
        disabled: false
      mgr:
        disabled: false
      osd:
        disabled: false

ingress:
  # -- Enable an ingress for the ceph-dashboard
  dashboard:
    {}
    # annotations:
    #   external-dns.alpha.kubernetes.io/hostname: dashboard.example.com
    #   nginx.ingress.kubernetes.io/rewrite-target: /ceph-dashboard/$2
    # If the dashboard has ssl: true the following will make sure the NGINX Ingress controller can expose the dashboard correctly
    #   nginx.ingress.kubernetes.io/backend-protocol: "HTTPS"
    #   nginx.ingress.kubernetes.io/server-snippet: |
    #     proxy_ssl_verify off;
    # host:
    #   name: dashboard.example.com
    #   path: "/ceph-dashboard(/|$)(.*)"
    # tls:
    # - hosts:
    #     - dashboard.example.com
    #   secretName: testsecret-tls
    ## Note: Only one of ingress class annotation or the `ingressClassName:` can be used at a time
    ## to set the ingress class
    # ingressClassName: nginx

# TODO a ssd blockpool
# -- A list of CephBlockPool configurations to deploy
# @default -- See [below](#ceph-block-pools)
cephBlockPools:
  - name: ceph-blockpool
    # see https://github.com/rook/rook/blob/master/Documentation/CRDs/Block-Storage/ceph-block-pool-crd.md#spec for available configuration
    spec:
      failureDomain: host
      replicated:
        size: 3
      deviceClass: hdd
      # Enables collecting RBD per-image IO statistics by enabling dynamic OSD performance counters. Defaults to false.
      # For reference: https://docs.ceph.com/docs/latest/mgr/prometheus/#rbd-io-statistics
      # enableRBDStats: true
    storageClass:
      enabled: true
      name: ceph-block
      isDefault: true
      reclaimPolicy: Delete
      allowVolumeExpansion: true
      volumeBindingMode: "Immediate"
      mountOptions: []
      # see https://kubernetes.io/docs/concepts/storage/storage-classes/#allowed-topologies
      allowedTopologies: []
      #        - matchLabelExpressions:
      #            - key: rook-ceph-role
      #              values:
      #                - storage-node
      # see https://github.com/rook/rook/blob/master/Documentation/Storage-Configuration/Block-Storage-RBD/block-storage.md#provision-storage for available configuration
      parameters:
        # (optional) mapOptions is a comma-separated list of map options.
        # For krbd options refer
        # https://docs.ceph.com/docs/latest/man/8/rbd/#kernel-rbd-krbd-options
        # For nbd options refer
        # https://docs.ceph.com/docs/latest/man/8/rbd-nbd/#options
        # mapOptions: lock_on_read,queue_depth=1024

        # (optional) unmapOptions is a comma-separated list of unmap options.
        # For krbd options refer
        # https://docs.ceph.com/docs/latest/man/8/rbd/#kernel-rbd-krbd-options
        # For nbd options refer
        # https://docs.ceph.com/docs/latest/man/8/rbd-nbd/#options
        # unmapOptions: force

        # RBD image format. Defaults to "2".
        imageFormat: "2"

        # RBD image features, equivalent to OR'd bitfield value: 63
        # Available for imageFormat: "2". Older releases of CSI RBD
        # support only the `layering` feature. The Linux kernel (KRBD) supports the
        # full feature complement as of 5.4
        imageFeatures: layering

        # These secrets contain Ceph admin credentials.
        csi.storage.k8s.io/provisioner-secret-name: rook-csi-rbd-provisioner
        csi.storage.k8s.io/provisioner-secret-namespace: "{{ .Release.Namespace }}"
        csi.storage.k8s.io/controller-expand-secret-name: rook-csi-rbd-provisioner
        csi.storage.k8s.io/controller-expand-secret-namespace: "{{ .Release.Namespace }}"
        csi.storage.k8s.io/node-stage-secret-name: rook-csi-rbd-node
        csi.storage.k8s.io/node-stage-secret-namespace: "{{ .Release.Namespace }}"
        # Specify the filesystem type of the volume. If not specified, csi-provisioner
        # will set default as `ext4`. Note that `xfs` is not recommended due to potential deadlock
        # in hyperconverged settings where the volume is mounted on the same node as the osds.
        csi.storage.k8s.io/fstype: ext4

# -- A list of CephFileSystem configurations to deploy
# @default -- See [below](#ceph-file-systems)
cephFileSystems:
  - name: ceph-filesystem
    # see https://github.com/rook/rook/blob/master/Documentation/CRDs/Shared-Filesystem/ceph-filesystem-crd.md#filesystem-settings for available configuration
    spec:
      metadataPool:
        replicated:
          size: 3
        deviceClass: ssd
      dataPools:
        - failureDomain: host
          replicated:
            size: 3
          # Optional and highly recommended, 'data0' by default, see https://github.com/rook/rook/blob/master/Documentation/CRDs/Shared-Filesystem/ceph-filesystem-crd.md#pools
          name: data0
          deviceClass: hdd
      metadataServer:
        activeCount: 1
        activeStandby: true
        resources:
          limits:
            cpu: "500m"
            memory: "2Gi"
          requests:
            cpu: "250m"
            memory: "1Gi"
        placement:
          nodeAffinity:
            requiredDuringSchedulingIgnoredDuringExecution:
              nodeSelectorTerms:
                - matchExpressions:
                  - key: storage-node
                    operator: In
                    values:
                      - "true"
          podAffinity:
          podAntiAffinity:
          topologySpreadConstraints:
          tolerations:
          - key: storage-node
            operator: Exists
        priorityClassName: system-cluster-critical
    storageClass:
      enabled: true
      isDefault: false
      name: ceph-filesystem
      # (Optional) specify a data pool to use, must be the name of one of the data pools above, 'data0' by default
      pool: data0
      reclaimPolicy: Delete
      allowVolumeExpansion: true
      volumeBindingMode: "Immediate"
      mountOptions: []
      # see https://github.com/rook/rook/blob/master/Documentation/Storage-Configuration/Shared-Filesystem-CephFS/filesystem-storage.md#provision-storage for available configuration
      parameters:
        # The secrets contain Ceph admin credentials.
        csi.storage.k8s.io/provisioner-secret-name: rook-csi-cephfs-provisioner
        csi.storage.k8s.io/provisioner-secret-namespace: "{{ .Release.Namespace }}"
        csi.storage.k8s.io/controller-expand-secret-name: rook-csi-cephfs-provisioner
        csi.storage.k8s.io/controller-expand-secret-namespace: "{{ .Release.Namespace }}"
        csi.storage.k8s.io/node-stage-secret-name: rook-csi-cephfs-node
        csi.storage.k8s.io/node-stage-secret-namespace: "{{ .Release.Namespace }}"
        # Specify the filesystem type of the volume. If not specified, csi-provisioner
        # will set default as `ext4`. Note that `xfs` is not recommended due to potential deadlock
        # in hyperconverged settings where the volume is mounted on the same node as the osds.
        csi.storage.k8s.io/fstype: ext4

# -- Settings for the filesystem snapshot class
# @default -- See [CephFS Snapshots](../Storage-Configuration/Ceph-CSI/ceph-csi-snapshot.md#cephfs-snapshots)
cephFileSystemVolumeSnapshotClass:
  enabled: false
  name: ceph-filesystem
  isDefault: true
  deletionPolicy: Delete
  annotations: {}
  labels: {}
  # see https://rook.io/docs/rook/v1.10/Storage-Configuration/Ceph-CSI/ceph-csi-snapshot/#cephfs-snapshots for available configuration
  parameters: {}

# -- Settings for the block pool snapshot class
# @default -- See [RBD Snapshots](../Storage-Configuration/Ceph-CSI/ceph-csi-snapshot.md#rbd-snapshots)
cephBlockPoolsVolumeSnapshotClass:
  enabled: false
  name: ceph-block
  isDefault: false
  deletionPolicy: Delete
  annotations: {}
  labels: {}
  # see https://rook.io/docs/rook/v1.10/Storage-Configuration/Ceph-CSI/ceph-csi-snapshot/#rbd-snapshots for available configuration
  parameters: {}

# -- A list of CephObjectStore configurations to deploy
# @default -- See [below](#ceph-object-stores)
cephObjectStores:
  - name: ceph-objectstore
    # see https://github.com/rook/rook/blob/master/Documentation/CRDs/Object-Storage/ceph-object-store-crd.md#object-store-settings for available configuration
    spec:
      metadataPool:
        failureDomain: host
        replicated:
          size: 3
        deviceClass: ssd
      dataPool:
        failureDomain: host
        erasureCoded:
          dataChunks: 2
          codingChunks: 1
        deviceClass: hdd
      preservePoolsOnDelete: true
      gateway:
        placement:
          nodeAffinity:
            requiredDuringSchedulingIgnoredDuringExecution:
              nodeSelectorTerms:
                - matchExpressions:
                  - key: storage-node
                    operator: In
                    values:
                      - "true"
          podAffinity:
          podAntiAffinity:
          topologySpreadConstraints:
          tolerations:
          - key: storage-node
            operator: Exists
        port: 6980
        resources:
          limits:
            cpu: "500m"
            memory: "2Gi"
          requests:
            cpu: "250m"
            memory: "1Gi"
        # securePort: 443
        # sslCertificateRef:
        instances: 1
        priorityClassName: system-cluster-critical
      healthCheck:
        bucket:
          interval: 60s
    storageClass:
      enabled: true
      name: ceph-bucket
      reclaimPolicy: Delete
      volumeBindingMode: "Immediate"
      # see https://github.com/rook/rook/blob/master/Documentation/Storage-Configuration/Object-Storage-RGW/ceph-object-bucket-claim.md#storageclass for available configuration
      parameters:
        # note: objectStoreNamespace and objectStoreName are configured by the chart
        region: us-east-1
    ingress:
      # Enable an ingress for the ceph-objectstore
      enabled: false
      # annotations: {}
      # host:
      #   name: objectstore.example.com
      #   path: /
      # tls:
      # - hosts:
      #     - objectstore.example.com
      #   secretName: ceph-objectstore-tls
      # ingressClassName: nginx
# cephECBlockPools are disabled by default, please remove the comments and set desired values to enable it
#cephECBlockPools:
#  # For erasure coded a replicated metadata pool is required.
#  # https://rook.io/docs/rook/latest/CRDs/Shared-Filesystem/ceph-filesystem-crd/#erasure-coded
#  - name: ec-metadata-pool
#    # see https://github.com/rook/rook/blob/master/Documentation/CRDs/Block-Storage/ceph-block-pool-crd.md#spec for available configuration
#    spec:
#      replicated:
#        size: 2
#  - name: ec-data-pool
#    spec:
#      failureDomain: osd
#      erasureCoded:
#        dataChunks: 2
#        codingChunks: 1
#      deviceClass: hdd

# cephECStorageClass also is disabled by default, please remove the comments and set desired values to enable it
# if cephECBlockPools are uncommented you must remove the comments of cephEcStorageClass as well
#cephECStorageClass:
#  name: rook-ceph-block
#  parameters:
#    # clusterID is the namespace where the rook cluster is running
#    # If you change this namespace, also change the namespace below where the secret namespaces are defined
#    clusterID: rook-ceph # namespace:cluster
#
#    # If you want to use erasure coded pool with RBD, you need to create
#    # two pools. one erasure coded and one replicated.
#    # You need to specify the replicated pool here in the `pool` parameter, it is
#    # used for the metadata of the images.
#    # The erasure coded pool must be set as the `dataPool` parameter below.
#    dataPool: ec-data-pool
#    pool: ec-metadata-pool
#
#    # (optional) mapOptions is a comma-separated list of map options.
#    # For krbd options refer
#    # https://docs.ceph.com/docs/latest/man/8/rbd/#kernel-rbd-krbd-options
#    # For nbd options refer
#    # https://docs.ceph.com/docs/latest/man/8/rbd-nbd/#options
#    # mapOptions: lock_on_read,queue_depth=1024
#
#    # (optional) unmapOptions is a comma-separated list of unmap options.
#    # For krbd options refer
#    # https://docs.ceph.com/docs/latest/man/8/rbd/#kernel-rbd-krbd-options
#    # For nbd options refer
#    # https://docs.ceph.com/docs/latest/man/8/rbd-nbd/#options
#    # unmapOptions: force
#
#    # RBD image format. Defaults to "2".
#    imageFormat: "2"
#
#    # RBD image features, equivalent to OR'd bitfield value: 63
#    # Available for imageFormat: "2". Older releases of CSI RBD
#    # support only the `layering` feature. The Linux kernel (KRBD) supports the
#    # full feature complement as of 5.4
#    # imageFeatures: layering,fast-diff,object-map,deep-flatten,exclusive-lock
#    imageFeatures: layering
#  allowVolumeExpansion: true
#  reclaimPolicy: Delete

# -- CSI driver name prefix for cephfs, rbd and nfs.
# @default -- `namespace name where rook-ceph operator is deployed`
csiDriverNamePrefix: